TECHGROW - T-1 PRO CO2 CONTROLLER - (SENSOR NOT INCLUDED)

The T-1 Pro CO² Controller is the most advanced carbon dioxide regulator on the market. It accurately creates the desired CO² levels in your grow room, making it one of the most effective CO² regulators. Easy to configure, yet packed with professional features it is ideally suited for both beginners looking to put together their first grow kit, as well as the more seasoned urban gardener vying for the biggest buds.

Provide your crops the consistency they need to gain the highest possible yields with its automatic CO² dosing counter. It’s adjustable pulse dosing allows you to maintain a stable CO² level in your microenvironment. It also has a dosing delay function, which enables delayed activation of CO² enrichment in your room, making it the smart sensor that can ensure your grow stays in an optimal condition even in your absence. Keep track of your progress with its automatic logging function, which has a storage capacity of a full 7 days.

With its highly sensitive ppm sensor, the T-1 Pro is adjustable from 300ppm to 2000 ppm or from 300ppm to 10000 ppm. From the clear display, you can read the actual values of the connected sensors as well as the minimum/maximum values. The T-1 Pro Controller automatically switches between day and night settings by means of light detection and thanks to the built-in calibration function, you can calibrate your CO² sensor in fresh air.

The T-1 Pro comes without a sensor. It is compatible with our range of Techgrow carbon dioxide sensors, which act as CO² monitors and are designed specifically for our CO² regulators.

Key Features
Fully adjustable from 300ppm to 2,000ppm or from 300ppm to 10,000ppm.
Adjustable dosing delay and timer.
Automatic CO² dosing counter.
Logging of the CO² counter, stored for 7 days.
Pulse dose function for dosed addition of CO².
Built-in calibration function, able to calibrate the CO² sensor in fresh air.
Displays CO², Temperature and Humidity (sensors must be connected).
Display shows minimum/maximum values of connected sensor(s).
Display is updated every second.
LED indicators for CO² dosage, light detection and a stable climate.
Compatible with multiple TechGrow devices.
All settings are automatically saved during a power failure.
Automatically switches between day/night mode (light sensor must be connected)
Energy saving, automatically turns off display backlight after 60 seconds.
Automatic fault detection of cable failure or bad connection with the sensors.
Sensor connection with standard network cable (UTP)
Techgrow sensors are available separately (0-2,000 ppm / 0-10,000 ppm).
Can connect to the TechGrow Datalogger (DL-1).