TECHGROW - T-2 PRO CO2 CONTROLLER 4,5A - (SENSOR NOT INCLUDED)

The T-2 Pro CO² Controller is the extended version of the T-1 Pro CO² Controller. The additional built-in climate controller allows to control the CO² level as well as the temperature value and humidity in your space. Through this unique combination, you will be able to dose CO2 during the day and suck excess CO² and moisture produced by your plants throughout the night. In addition, the TechGrow T-2 Pro CO² Controller keeps the temperature in your space at the desired level.

The measuring range of this CO² controller stretches from 300 to 2000 ppm or from 300 to 10000 ppm, to be selected by the user. The connected sensor allows for automatic switch between day and night mode.

The T-2 Pro CO² Controller is a fully equipped device with built-in dosing delay, timer, dose counter and memory for performing display data like the minimum and maximum CO² level. Moreover, this CO² controller has a unique calibration function for perfect adjustment of your fan. Due to special hardware and software, the fan control operates smoothly and noiseless.

The T-2 Pro CO² Controller has a robust, splash-proof housing and is easy to operate with 1 push-and-turn-knob. Information can be easily read from the bright and large LCD display.

Note:

The T-2 Pro CO² Controller comes without sensor.
Recommended sensor: S-4 sensor / 0-2000 ppm.

Versions: 4.5A –7A and 14A

Features

- Measures and regulates CO², temperature and relative humidity at the same time, during the day and at night.
- Sucks excess CO² out of the air at night.
- Displays the minimum/maximum values of connected sensor.
- Adjustable from 300 to 2,000 ppm or from 300 to 10,000 ppm.
- Adjustable dosing delay and timer.
- Automatic CO² dosing counter.
- Dose log of the CO² counter of the past 7 days and display of the total (cumulative) dosing time.
- Pulse dosing for dosed addition of CO².
- Built-in calibration function for CO² and temperature.
- The display is refreshed every second.
- Indication LEDs for CO² dosing, light detection and stable climate.
- All set, hysteresis, and alarm values of the sensor are individually adjustable.
- Quick menus for a handy overview of all settings.
- Suitable for connecting fans up to 5,000 m3/hour (7 A) and up to 10,000 m3/hour (14 A).
- The fan control has 2 setting options: automatic or manual.
- Fan and CO² relays are fused seperately.
- All settings are saved in case of a power failure.
- The controller automatically switches between day and night mode by means of the light sensor.
- UPT connection.
- Various sensors are available separately (0-2,000 ppm/0-10,000 ppm).
- Possibility to connect the TechGrow Datalogger (DL-1).