Best Value Vacs 2,6 liters Pyrex Vacuum Chamber

BVV275PX
New product

99,99 €

- +

Add to wishlist

Add to compare

 
More info

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Naperville, Illinois. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs. Pyrex chambers have a glass body to the chamber, giving a better view of the inside. 

-Please Refer to these charts for vacuum specifications at altitude and conversions:


Key Features:



    • Pyrex Glass Vessel

    • Neoprene Gasket

    • Glycerin filled vacuum gauge

    • User friendly vacuum connections that fit most vacuum pumps on the market

    • 50 Micron Air filter for reducing airborne contaminants when releasing the vacuum

    • Silicone vacuum pad

    • 5' of vacuum rated HVAC hose to pull a vacuum.



 

Specifications:

 

Chamber MaterialPyrex Glass

Gasket Material

Neoprene
Lid MaterialAcrylic
Internal Dimensions (ID)HxLXL 7,3 cm x 23 cm x 18,5 cm | Drafting Downwards to 20x15 cm
Vacuum Gauge (Glycerin Filled)InHG (0)-(-30)
Manifold Connections1/4" SAE and 1/4" FNPT
Temperature Rating150°F (65°C)
Additional Included Items5' Orange Vacuum Rated HVAC Hose
Platinum Cured Silicone Pad
Black 50 Micron Air Filter

 


 


Compatibility Explanation:


BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.

Ask a site administrator for security specifications




Pump Warranty Information:


Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Exludes Cactus Juice™)

•If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.

•These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.

•When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)

•To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.


Write a review

Best Value Vacs 2,6 liters Pyrex Vacuum Chamber

Write a review

 
Custom tab

This is a custom block edited from admin panel.You can insert any content here.

Compare 0