Dewaxing Closed Column Extractor (1.5") 270g - Professional

CCE15036D-V2
New product

409,99 €

- +

Add to wishlist

Add to compare

 
More info

DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. DO NOT USE INDOORS

*Note:  Column capacity may vary depending on the biomass density, moisture content and column packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity.  Low density, uncut, heavily dried, and/or lightly packed material can reduce capacity by 50%. 
For best results, we recommend to tightly pack coarse ground material.

Shop Dewaxing Closed Column Extractor

Key Features and Description:

    • Dewaxing Spool Included for filter out and coagulating waxes and lipids.

    • Compound Gauge with (-30)-160 PSI readout.

    • Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)

    • This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.

    • The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included

    • Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended

    • This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.


Professional Kit Adds the following:

  • Compound Gauge
  • Sight Glass
  • Shower Head

Explorer Kit Automatically Includes:



    • 8" x 8" Platinum Cured Silicone Non-Stick Pad

    • 1.5" Dewaxer Tri-Clamp 304 Stainless Steel Material Tube



      • Dewaxer Spool Sizes Specifications:



        • 1.5" x 12" Dewaxer = 90G

        • 1.5" x 18" Dewaxer= 135G

        • 1.5" x 24" Dewaxer= 180G

        • 1.5" x 36" Dewaxer = 270G




    • 304 Stainless Steel Flare End Caps with Heavy Duty Stainless Steel Miniature Ball Valves

    • 1/4" Stainless Steel MNPT Drain Plug

    • (1) 1.5" Standard Pressure Tri-Clamp Clamps

    • 1.5" Tri-Clamp Quadpod

    • (2) Buna-N Tri-Clamp Gaskets

    • Buna-N 100 Mesh (150 Micron) Gasket

 

***Note: Parts and components can be subject to substitutions. Any substituted parts will have the same function and will be of equal or greater value.****


Write a review

Dewaxing Closed Column Extractor (1.5") 270g - Professional

Write a review

 
Custom tab

This is a custom block edited from admin panel.You can insert any content here.

Compare 0